CLI Guide

Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
controller=id enclosure=<ENCLOSUREID>
info=pwrsupplies index=n where id is the
controller number and ENCLOSUREID is
the enclosure number and n is the number
of a power supply. For example:
controller=0 enclosure=2 info=pwrsupplies
index=1
Displays the specied power supply.
Omreport EMM Status
The following table describes the syntax for the omreport EMM commands:
NOTE: The status of the EMMs is displayed as degraded if there is a mismatch between the EMM rmware.
Table 99. Omreport EMM Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=emms where id is the controller
number and ENCLOSUREID is the
enclosure number. For example:
controller=0 enclosure=2
Displays the enclosure management
modules (EMMs) for the specied
enclosure.
controller=id enclosure=<ENCLOSUREID>
info=emms index=n where id is the
controller number and ENCLOSUREID is
the enclosure number and n is the number
of an EMM. For example: controller=0
enclosure=2 info=emms index=1
Displays the specied EMMs.
Omreport Enclosure Slot Occupancy Report
The following table describes the syntax for the omreport Enclosure Slot Occupancy Report commands:
Table 100. Omreport Enclosure Slot Occupancy Report Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=pdslotreport, where id is the
controller number and ENCLOSUREID is
the enclosure number. For example:
controller=0 enclosure=2
Displays the empty and occupied slot
details for the specied enclosure.
NOTE: This command is not
supported on Blackplane, SCSI, and
SWRAID controllers.
Omreport Battery Status
The following table describes the syntax for the omreport Battery commands:
122