CLI Guide

Table 90. Syntax For Name=Value Pairs
Syntax Description
controller=id
Indicates the controller ID as reported by the omreport storage controller
command. To obtain these values, type omreport storage controller
to display the controller IDs and then type omreport storage pdisk
controller=id
to display the IDs for the physical disks attached to the
controller.
For example, the controller=id parameter is specied as controller=1.
connector=id
Indicates the connector ID as reported by the omreport command. To obtain
this value, type omreport storage controller to display the controller
IDs and then type omreport storage connector controller=id to
display the IDs for the connectors attached to the controller.
For example, the connector=id parameter is specied as connector=2.
vdisk=id
Indicates the virtual disk ID as reported by the omreport command. To obtain
this value, type omreport storage controller to display the controller
IDs and then type omreport storage vdisk controller=id to
display the IDs for the virtual disks on the controller.
For example, the vdisk=id parameter is specied as vdisk=3.
enclosure=<ENCLOSUREID>
Indicates a particular enclosure by specifying either enclosure=connector or
enclosure=connector:enclosureID.
To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage enclosure
controller=id
to display the IDs for the enclosures attached to the
controller.
pdisk=<PDISKID>
Indicates a particular physical disk by specifying either connector:targetID or
connector:enclosureID:targetID.
To obtain the values for the connector, enclosure, and physical disk (targetID),
type omreport storage controller to display the controller IDs and
then type omreport storage pdisk controller=id to display the
IDs for the physical disks attached to the controller.
battery=id
Indicates the battery ID as reported by the omreport command. To obtain this
value, type omreport storage controller to display the controller IDs
and then type omreport storage battery controller=id to
display the ID for the controller battery.
< >
The caret symbols (< >) enclose variable elements that you must specify.
For example, the name=<string>parameter is specied as name=VirtualDisk1.
[ ]
The bracket symbols ([ ]) indicate optional elements that you can choose
whether or not to specify.
For example, when creating a virtual disk, the [name=<string>] parameter
indicates that you have the option of specifying the virtual disk name. If you
omit this parameter from the syntax, then a default name for the virtual disk is
chosen for you.
|
The pipe symbol (|) separates two or more options from which only one is
selected.
For example, when creating a virtual disk, the cachepolicy=d | c indicates that
the cache policy is specied as either cachepolicy=d or cachepolicy=c.
User Privileges For Omreport Storage And Omcong Storage
Storage Management requires Administrator privileges to use the omcong storage command. User and Power User privileges are
sucient to use the omreport storage command.
117