CLI Guide

Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
type=network | storage Whether support is for
network attached devices
or for storage devices.
.
Example command for adding support information
To provide a value for a support parameter, type a command of the form omcong system assetinfo info=support <name=value pair
2> or omcong servermodule assetinfo info=support <name=value pair 2>. For example, type:
omconfig system assetinfo info=support outsourced=true
or
omconfig servermodule assetinfo info=support outsourced=true
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as
all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Command For Adding
Acquisition Information.
Adding system information
System information includes the primary user of the system, the phone number for the primary user, and the location of the system.
The following table displays the valid parameters for adding system information.
Table 87. Valid Parameters Of omcong system assetinfo info=system Or omcong servermodule assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=system location=<text> Location of the system.
primaryphone=<n> Phone number of the primary user
of the system.
primaryuser=<user> Primary user of the system.
Example command for adding system information
To provide a value for a system parameter, type a command of the form omcong system assetinfo info=system <name=value pair
2> or omcong servermodule assetinfo info=system <name=value pair 2>. For example, type:
omconfig system assetinfo info=system location=firstfloor
or
omconfig servermodule assetinfo info=system location=firstfloor
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as
all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Command For Adding
Acquisition Information.
114