Users Guide

Property Denition

Failure Threshold The Minimum and Maximum properties indicate the

temperatures currently set for the Failure threshold.

Related links

Enclosure Temperature Probes

Checking The Temperature Of The Enclosure

Setting The Temperature Probe Values

Enclosure Management Modules (EMMs)

The Enclosure Management Modules (EMMs) that are installed in the enclosure are displayed under the EMMs object in the tree

view. You can select the EMMs object to view the individual EMM modules and their status information.

The enclosure may contain one or more EMMs. The EMM modules monitor components of the enclosure. These components

include:

• Fans

• Power supplies

• Temperature probes

• The insertion or removal of a physical disk

• The LEDs on the enclosure

When the alarm on the enclosure is enabled, the EMM activates the alarm when certain conditions occur. For more information on

enabling the alarm and the conditions that activate the alarm, see Enabling The Enclosure Alarm. For more information on EMMs,

see the enclosure hardware documentation.

All EMM modules in the enclosure should have the same version of rmware. You can view the properties of each individual EMM

module to verify the rmware version.

Verifying The EMM Firmware Version Of The Enclosure

Does my controller support this feature? See Supported Features.

The rmware for the EMM must be at the same level as that of the enclosure. The status of the EMMs is displayed as degraded if

there is a mismatch between the EMM rmware.

To verify the EMM rmware version:

1. In the Server Administrator window, under the system tree, click Storage dashboard.

2. Expand the tree view until the EMMs object is displayed.

3. Select the EMMs object. The rmware version for each EMM is displayed in the Firmware Version column in the right pane.

For information related to the enclosure’s EMMs, see Enclosure Management Modules (EMMs).

EMM Properties

Table 25. EMM Properties

Property Denition

Status These icons represent the severity or health of the storage component.

— Normal/OK

— Warning/Non-critical

— Critical/Failure/Error

— Unknown

For more information, see Storage Component Severity.

Name Displays the name of the EMM.