Users Guide
9
Support for Marvell RAID Controllers
All Operating Systems compatible to OM 9.0.1 are supported by Marvell RAID Controllers except ESXi family of OSes.
The Marvell RAID Controllers supports the following enumeration and monitoring operations:
• The physical disks are (M.2 devices) are directly connected to the Controller
• Enumeration of Physical Disks (M.2 devices) are supported
• Enumeration of Virtual Disks on M.2 devices are supported
The following tasks are not supported:
• Conguration options are not supported for this controller.
• Enclosures and connectors are not applicable for the Controller.
• No physical disks operations / tasks are supported for this Controller
• No conguration operations are supported for virtual disks including creation, deletion, reconguration and so on.
• No controller tasks are supported
The following physical disks properties are enumerated for this controllers: ID, Status, Name, State, Bus Protocol, Media, Revision,
Model Number, Capacity, Used RAID Disk Space, Available RAID Disk Space, Hot Spare, Vendor ID, Product ID, Serial No., Negotiated
Speed, Capable Speed, Sector Size and SAS Address.
NOTE: SAS Address is not available for M.2 devices.
The following controller properties are enumerated for this controllers: ID, Status, Name, Slot ID, State, Firmware Version, Rebuild
Rate, BGI Rate, Check Consistency Rate, Cache Memory Size, and Patrol Read Rate.
The following virtual disk properties are enumerated for this controllers: Status, Name, State, Tasks, Layout, size, Device Name, Bus
Protocol, Media, Read Policy, Write Policy, Stripe Element Size, and Disk Cache Policy.
NOTE: Layout option will not be available for non-RAID disks.
NOTE: For Marvell RAID Controller, the physical disk is directly connected to the controller as no enclosure or connector
is applicable for this controller.
NOTE: Any conguration operations through OMSA are not supported for virtual disks, physical disks and controllers.
86