Users Guide

Related links

Properties In Manage Physical Disk Power Option

Physical Disk Power On Uncongured Drives And Hot Spares

Managing Physical Disk Power Using The Customized Power Savings Mode

Managing Physical Disk Power Using The QoS Option

Managing The Time Interval For The QoS Option

Properties In Manage Physical Disk Power Option

The following table displays the properties in the Manage Physical Disk Power option:

Table 15. Manage Physical Disk Power Properties

Property Denition

Spin Down Uncongured Drives The Enabled option spins down the uncongured disks if they

are unattended for a specied interval of time.

Spin Down Hot Spares The Enabled option spins down the hot spares if no read‑write

operation takes place on the hot spare in a specied interval of

time.

Spin Down Congured Drives The Enabled option spins down the congured disks if they are

unattended for a specied interval of time.

Automatic Disk Power Saving (Idle C) Enables or disables the Automatic Disk Power Saving (Idle C)

feature for additional power saving. When enabled, it enables

the new generation power savings without aecting the legacy

drives.

Time Interval for Spin Down Sets the time interval after which the hot spares and

uncongured drives spins down.

Quality Of Service (QOS)

Enable Quality Of Service Settings Select to set the start time and the time interval for spin up

activity at the virtual disk level.

NOTE: This option is available only if the Spin Down

Congured Drives option is selected.

Start Time (HH:MM) Displays the start time of the battery learn cycle. This option is

enabled only if Enable Quality Of Service Settings is selected.

Time Interval for Spin Up (in Hours) Displays the spin up time interval for the battery learn cycle. The

time interval can range from 1-24 hours.