Users Guide

To Locate Export Log In Storage Management

To locate this task in storage management:

1. Expand the Storage tree object to display the controller objects.

2. Select a controller object.

3. Click Information/Conguration.

4. Select Export Log from the Available Tasks drop-down menu.

5. Click Execute.

You can also locate this task from the Change Controller Properties drop-down menu.

Foreign Conguration Operations

Does my controller support this feature? See Supported Features.

The Foreign Conguration Operations task provides a preview of the foreign congurations that you can import.

NOTE: This task is not supported on PERC hardware controllers running in HBA mode.

NOTE: Foreign Conguration Operations task is available only on PERC 6 and SAS controllers with rmware versions 6.1

and later.

A foreign conguration is data residing on physical disks that have been moved from one controller to another. Virtual disks residing

on physical disks that have been moved are considered to be a foreign conguration.

NOTE: It is not recommended to remove an external enclosure cable while the operating system is running on the

system. Removing the cable could result in a foreign conguration when the connection is re-established.

The Foreign Conguration Operations task is displayed only when a controller detects a foreign conguration. Select this option

and click Execute to display the Foreign Conguration Preview page.

The Foreign Conguration Preview page provides a preview of the foreign disks and enables you to perform operations such as,

importing, recovering, or clearing the foreign disks. You can also import or clear a locked foreign conguration.

If any foreign congurations locked using Local Key manager (LKM) are detected, the associated Encryption Key Identier is

displayed prompting you to provide the corresponding passphrase to unlock the drives.

To avoid unlocking foreign congurations and to proceed to preview, import, or clear a foreign conguration that has not been

locked, click Skip or Continue.

If you do not want to import or clear the foreign congurations, or if there is loss of the associated passphrase of the corresponding

Encryption Key Identier, perform the Cryptographic Erase task for the physical disks.

CAUTION: Performing the Cryptographic Erase task erases all data on the physical disk.

Some conditions, such as an unsupported RAID level or an incomplete disk group, can prevent the import or recovery of foreign

virtual disks.