Users Guide
Controller Tasks
The following are the list of available tasks on a controller:
• Creating A Virtual Disk
• Enabling The Controller Alarm
• Disabling The Controller Alarm
• Turning O The Controller Alarm
• Testing The Controller Alarm
• Setting The Rebuild Rate
• Resetting Conguration
• Exporting The Controller Log File
• Foreign Conguration Operations
• Importing Foreign Congurations
• Importing Or Recovering Foreign Congurations
• Clearing Foreign Conguration
• Setting Background Initialization Rate
• Setting Check Consistency Rate
• Setting The Reconstruct Rate
• Setting The Patrol Read Mode
• Starting And Stopping Patrol Read
• Managing The Preserved Cache
• Changing The Controller Properties
• Managing The Physical Disk Power
• Managing The Encryption Key
• Converting To RAID Capable Disks
• Converting To Non-RAID Disks
• Changing The Controller Mode
• Auto Congure RAID0 Operation
Creating A Virtual Disk
Does my controller support this feature? See Supported Features.
To launch the Create Virtual Disk Express Wizard, select the Create Virtual Disk task.
Related links
Create Virtual Disk Express Wizard
Enabling The Controller Alarm
Does my controller support this feature? See Supported Features.
To enable the alarm on the controller, select the Enable Alarm task. When enabled, the alarm sounds in the event of a device failure.
Related links
Using Alarms To Detect Failures
Disabling The Controller Alarm
Does my controller support this feature? Supported Features.
Select the Disable Alarm task to disable the alarm on the controller. When disabled, the alarm does not sound in the event of a
device failure.
Turning O The Controller Alarm
Does my controller support this feature? See Supported Features.
56