Users Guide

Properties Description
Drive Health Good — The drive is used within the TBW
specication. The drive health is good as sucient spare blocks
are available. The drive health status is good if the values for
percent lifetime used and write protect progress is less than 100
percent.
Approaching Warranty Coverage Expiry — The drive is reaching
the specied TBW, indicating that it is close to the end of
warranty coverage. However, the drive will be functional as the
number of spare blocks available are still above the threshold for
entering the read-only mode. The drive approaches the
warranty coverage expiry if the value for percent lifetime used is
greater than or equal to 90 percent and that for write protect
progress is less than the threshold value, which is 90 percent.
Warranty Coverage Expired — The drive has reached the TBW
threshold and met the life expectancy specication. The drive is
functional as the number of spare blocks available are still above
the threshold for entering the read-only mode. But, the
specied data retention period (amount of time that data can be
read from the drive after TBW is reached) drops, if TBW
specication is exceeded and the warranty for the drive expires.
The warranty coverage for the drive expires if the value for
percent lifetime used is equal to 100 percent and that for write
protect progress is less than 100 percent.
Approaching Read Only — The drive is running out of spare
sectors and is reaching the read-only mode. However, the health
status of the drive is good and data retention is unaected. The
drive is stated to be approaching the read-only mode if the value
for percent lifetime used is less than 100 percent and that for
write protect progress is greater than or equal to 90 percent.
Read Only — The drive is in read-only mode. Users must save
open les, if any, to another device and replace or remove the
device. If this scenario occurs within three years of the device
installation, this failure is covered under warranty. The drive is in
read-only mode if the value for percent lifetime used is less than
100 percent and that for write protect progress is equal to 90
percent.
Driver Version
Displays the version of the driver that is installed on the PCIe
SSD sub-system.
NOTE: Storage Management displays Not Applicable for
subsystem for which the driver version cannot be
obtained.
Remaining Rated Write Endurance
Displays information on the SSD renewal/replacement based on
the amount of write workloads. This eld indicates the total
remaining programs or erase-cycles available on the SSD, based
on the cumulative specication of the total NAND (Negated
AND or NOT AND) Flash chips in the SSD.
NOTE: This option is applicable to Micron PCIe SSDs,
Non-Volatile Memory Express (NVMe) PCIe SSDs, and
SAS/SATA SSDs.
Firmware Revision Displays the rmware version of the physical device.
Model Number Displays the Piece Part Identication (PPID) of the PCIe SSD.
Capacity Displays the capacity of the device.
Vendor ID Displays the hardware vendor of the device.
34