Reference Guide
Class Name:
DELL_PowerConsumptionData
Parent Class:
CIM_Logical Device
ResetCounters Is the function used to reset the peak
readings.
uint 32
powerCapSetting This refers to the user congured power
setting.
uint 16
instHeadroom This refers to the instantaneous
headroom.
uint 32
peakHeadRoom Is the function used to set the power
budget.
uint 32
DCIM_OEM_DataAccessModule
The DCIM_OEM_DataAccessModule class is derived from the CIM_ManagedElement class. This class models hardware
information in a proprietary format.
Table 75. DCIM OEM DataAccessModule
Class Name: DCIM_OEM_DataAccessModule
Parent Class: CIM_ManagedElement
Property Description Data Type
InstanceID Identies the instance. string
GlobalStatus Represents the global health status of the
system. This property can have the
following values:
0 - Other
1 - Unknown
2 - OK
3 - Warning / Non-Critical
4 - Critical
5 - Non-Recoverable
.. - Reserved
NOTE: GlobalStatus property is
available only for Linux systems.
sint32
SendCmd The SendCmd method is used to invoke
proprietary hardware management
operation.
string
iDRACIPv4 Provides Remote Access controller
(iDRAC ) IPv4 address.
string
iDRACIPv6 Provides Remote Access controller
(iDRAC ) IPv6 address.
string
66