Users Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=TpmClear
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
CAUTION: Clearing the TPM will
cause loss of all keys in the TPM.
This could aect booting of the
operating system.
setting=Yes | No
attribute=TpmSecurity setting=O | OnPbm | OnNoPbm
attribute=TpmInfo
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=TpmCommand
NOTE: The option is supported only
on 13G and later systems.
setting=None | Activate | Deactivate |
Clear
attribute=TpmStatus setting=<string>
attribute=TcmActivation
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
setting=NoChange | Activate | Deactivate
attribute=TcmClear
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
CAUTION: Clearing the TCM will
cause loss of all keys in the TCM.
This could aect booting of the
operating system.
setting=Yes | No
attribute=TcmSecurity
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
setting=O | OnPbm | OnNoPbm
attribute=SecureBoot
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
attribute=SecureBootPolicy
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
attribute=UeVariableAccess setting=Standard | Controlled
UEFI Boot Settings attribute=UeBootSeq sequence=aliasname1, aliasname2,.....
aliasnameN
Omcong Chassis Currents Or Omcong Mainsystem Currents
NOTE: This command is no longer available through Server Administrator.
72