Users Guide
Example to Enable thermal shutdown. The omcong command syntax for enabling thermal shutdown does not
require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine whether smart
thermal shutdown is currently enabled or disabled. The status of smart thermal shutdown is
also displayed by the Server Administrator graphical user interface (GUI). To locate this
status, select the Storage object and the Information/Conguration tab.
Example
omconfig storage globalinfo action=enablests
Omcong Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omcong command, you can disable smart thermal shutdown and
return the system to its default setting. When smart thermal shutdown is disabled, the operating system and the server shuts down
when the PV220S and PV221S enclosures reach a critical temperature of 0 or 50 degree Celsius.
Table 208. Omcong Global Disable Smart Thermal Shutdown
Description Disables smart thermal shutdown for all controllers.
Syntax
omconfig storage globalinfo action=disablests
Example to Disable thermal shutdown. The omcong command syntax for disabling thermal shutdown does not
require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine whether smart
thermal shutdown is currently enabled or disabled. The status of smart thermal shutdown is
also displayed in the GUI of Server Administrator. To locate this status, select the Storage
object and the Information/Conguration tab.
Example
omconfig storage globalinfo action=disablests
Omcong Global Rescan Controller
Table 209. Omcong Global Rescan Controller
Description Rescans all the controllers on the system. For more information about Global Rescan Controller, see
the Dell OpenManage Online Help.
Syntax
omconfig storage globalinfo action=globalrescan
Example to Do a global rescan of all controllers. The omcong command syntax for rescanning all controllers on
the system does not require a controller or enclosure ID.
NOTE: Global rescan is not supported on non-RAID SCSI and SAS controllers. Reboot the
system to make visible the conguration changes on non-RAID SCSI controllers.
Example
omconfig storage globalinfo action=globalrescan
177