Users Guide

Example
omconfig storage battery action=startlearn controller=1 battery=0
Omcong Delay Battery Learn Cycle
Table 205. Omcong Delay Battery Learn Cycle
Description Delays the battery learn cycle for a specied period of time. You can delay the battery learn cycle for
a maximum of seven days or 168 hours.
Syntax
omconfig storage battery action=delaylearn controller=id battery=id
days=d hours=h, where id is the controller ID and battery ID as reported by the omreport
command. To obtain this value, type omreport storage controller to display the controller
IDs and then type
omreport storage battery controller=ID to display the ID for the
controller battery.
Example to Delay the learn cycle for three days and 12 hours on controller 1.
Example
omconfig storage battery action=delaylearn controller=1 battery=0
days=3 hours=12
Omcong Global Commands
The following table displays the omcong command syntax required to execute the global commands. When executed, these
commands apply to all controllers. These global commands also correspond to the global tasks provided by the Storage tree view
object’s Information/Conguration subtab.
Table 206. Omcong Global Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs
omcong storage globalinfo
action=enablests
action=disablests
action=globalrescan
action=setprotectionpolicies type=ghs or dhs
action=setremainingratedwriteendurancethreshold type=sassata | pcie threshold=<1-100>
Omcong Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a critical temperature of 0
or 50 degree Celsius. However, if you have implemented connector redundancy on the PV220S and PV221S enclosures you can
specify that only the enclosure and not the operating system and server are shut down when the enclosure reaches a critical
temperature of 0 or 50 degree Celsius. Specifying that only the enclosure is shut down during excessive temperatures is known as
Smart Thermal Shutdown. For more information about Smart Thermal Shutdown, see the Dell OpenManage Online Help.
Table 207. Omcong Global Enable Smart Thermal Shutdown
Description Enables smart thermal shutdown.
Syntax
omconfig storage globalinfo action=enablests
176