Users Guide

Omcong Import Foreign Conguration
Table 179. Omcong Import Foreign Conguration
Description Imports all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importforeignconfig controller=id, where id is
the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in rmware version 5.0.x.
Example to Import foreign congurations on controller 1.
Example
omconfig storage controller action= importforeignconfig controller=1
Omcong Import Or Recover Foreign Conguration
Table 180. Omcong Import Or Recover Foreign Conguration
Description Imports and recovers all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importrecoverforeignconfig controller=id,
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported on rmware version 5.1.1 and later.
Example to Import foreign congurations on controller 1.
Example
omconfig storage controller action= importrecoverforeignconfig controller=1
Omcong Clear Foreign Conguration
Table 181. Omcong Clear Foreign Conguration
Description Clears or deletes all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= clearforeignconfig controller=id, where id is the
controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in rmware version 5.0.x.
Example to Clear foreign congurations on controller 1.
Example
omconfig storage controller action= clearforeignconfig controller=1
Omcong physical disk power management
Table 182. Omcong physical disk power management
Description Manages the power of physical disks in a controller by spinning down hot spares, congured drives, and
uncongured drives.
Syntax
omconfig storage controller action= setpdiskpwrmanagement
spindownunconfigureddrives= <enabled | disabled> spindownhotspares=<enabled |
disabled> spindownconfigureddrives=<enabled | disabled> idlec=<enabled |
disabled> spindowntimeinterval=<30 to 1440>(minutes)
168