Users Guide

Example command for adding lease information
To provide a value for a lease parameter, type a command of the form: omcong system assetinfo info=lease <name=value pair 2> or
omcong servermodule assetinfo info=lease <name=value pair 2>. For example, type:
omconfig system assetinfo info=lease value=4500
or
omconfig servermodule assetinfo info=lease value=4500
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfocommand at the same time, as long as
all the parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding maintenance information
Maintenance refers to activities required to keep the system in good working order. The following table displays the valid parameters
for adding maintenance information.
Table 80. Valid Parameters Of omcong system assetinfo info=maintenance Or omcong servermodule assetinfo info=maintenance
Command
Level 1
Command Level 2 Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=maintenanc
e
enddate=<enddate> Date the extended
warranty agreement ends.
provider=<provider> Business entity providing
the maintenance service.
startdate=<startdate> Date the maintenance
begins.
restrictions=<string> Activities not covered by
the maintenance contract.
Example command for adding maintenance information
To provide a value for a maintenance parameter, type a command of the form: omcong system assetinfo info=maintenance
<name=value pair 2> or omcong system assetinfo info=maintenance <name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance startdate=012504
or
omconfig servermodule assetinfo info=maintenance startdate=012504
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as
all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Commands For Adding
Acquisition Information.
119