Users Guide

As Server Administrator is not installed on Clients/Workstations, so CIM discovery is used when the target is running the OpenManage

Client Instrumentation.

For many other devices such as network printers, SNMP is the standard to communicate with (primarily discover) the device.

Devices such as EMC storage have proprietary protocols. Some information about this environment can be gathered from looking at

the ports used.

10. Are there any plans for SNMP v3 support?

No, there are no plans for SNMP v3 support.

11. Does an Underscore character in the domain name cause Server Admin login issues?

Yes, an underscore character in the domain name is invalid. All other special characters (except the hyphen) are invalid too. Use case-

sensitive alphabets and numerals only.

12. How does selecting/deselecting 'Active Directory' on the login page of Server Administrator impact privilege levels?

If you do not select the Active Directory check box, you will only have access that is configured in the Microsoft Active Directory. You

cannot log in using the Extended Schema Solution in Microsoft Active Directory.

This solution enables you to provide access to Server Administrator; allowing you to add/control Server Administrator users and

privileges to existing users in your Active Directory software. For more information, see "Using Microsoft Active Directory" in the

Server Administrator Installation Guide available at dell.com/openmanagemanuals.

13. What actions do I follow while performing Kerberos authentication and trying to login from Web server?

For authentication, the contents of the files /etc/pam.d/openwsman and /etc/pam.d/sfcb, on the managed node, must be

replaced with:

For 32-bit:

auth required pam_stack.so service=system-auth auth required /lib/security/pam_nologin.so

account required pam_stack.so service=system-auth

For 64-bit:

auth required pam_stack.so service=system-auth auth required /lib64/security/pam_nologin.so

account required pam_stack.so service=system-auth

14. Why is the Red Hat Enterprise Linux 5.9 (32-bit) operating system not able to detect the Emulex card after installing the

Emulex drivers?

On systems running Red Hat Enterprise Linux 5.9 (32-bit) operating system, the Emulex driver is dependent on the following RPMs:

• kernel-headers-2.6.18-346.el5.i386.rpm

• glibc-headers-2.5-107.i386.rpm

• glibc-devel-2.5-107.i386.rpm

• gcc-4.1.2-54.el5.i386.rpm

If any of the RPMs are missing, the system has issues in detecting the Emulex network adapters.

15. Server Administrator alerts are not displayed on SNMP trap, how to configure for enabling the SNMP traps?

Follow the steps for setting up the SNMP configuration to enable the Server Administrator alerts:

• esxcli system snmp set --communities public

• esxcli network firewall ruleset set --ruleset-id snmp --allowed-all true

• esxcli network firewall ruleset set --ruleset-id snmp --enabled true

• esxcli system snmp set -t <target_ip>@162/public

• esxcli system snmp set --enable true

Frequently Asked Questions