Users Guide

NOTE: The number of destinations that you can configure on a given system may vary.
3. Select the Enable Destination check box.
4. Click Destination Number to enter an individual IP address for that destination. This IP address is the IP address to which the
platform event alert is sent.
NOTE: On 12G systems with iDRAC7 specific versions, you can set Platform Event Destination as IPv4, IPv6, or
FQDN.
5. Enter a value in the Community String field to act as a password to authenticate messages sent between a management station and
a managed system. The community string (also called the community name) is sent in every packet between the management station
and a managed system.
6. Click Apply.
7. Click Go Back to Platform Events Page to go back to the Platform Event Filters window.
54 Working with remote access controller