Users Guide

3. Identify a connector that is not attached to storage. If the connector is already attached to storage, then the connector object

can be expanded to display an enclosure or backplane and the attached physical disks. A connector object that cannot be

expanded in the tree view is an open connector not currently attached to storage. Storage Management displays a number for

each connector. These numbers correspond to the connector numbers on the controller hardware. You can use these numbers

to identify which open connector displayed in the tree view with the open connector on the controller hardware.

Enclosure Components

For information on attached components, see:

• Physical Disk Or Physical Device Properties

• EMM Properties

• Fan Properties

• Power Supply Properties

• Temperature Probe Properties And Tasks