Users Guide

Controller Components

For information on attached components, see:

• RAID Controller Batteries

• Firmware Or Driver Versions

• Connectors

NOTE: If you have connected the enclosure in Redundant path mode, the connectors are represented as Logical

Connector.

• Virtual Disks

Controllers Properties And Tasks

Use the controllers properties and tasks window to view information about the controller and perform controller tasks.

NOTE: The rmware and drivers listed in the

Server Administrator Release Notes

, see the minimum supported version for

these controllers. Later versions of the rmware and drivers are also supported. For the most recent driver and rmware

requirements, contact your service provider. The controller properties can vary depending on the model of the controller.

Table 11. Controller Properties

Property Denition

ID Displays the ID assigned to the controller by Storage

Management. Storage Management numbers the controllers

attached to the system starting with zero. This number is the

same as the controller ID number reported by the omreport

CLI Command. For information on Command Line Interface, see

the Server Administrator Command Line Interface User’s Guide.

Status These icons represent the severity or health of the storage

component.

For more information, see Storage Component Severity.

• — Normal/OK

• — Warning/Non-critical

• — Critical/Failure/Error

Name Displays the name of the controller.

NOTE: For PowerEdge FD332 storage sled, the name is

displayed as:

• Single controller — PERC FD33xS (Integrated RAID

Controller <X> in Front Chassis Slot <Y>, where X

displays the controller number and Y displays the front

chassis slot number.

• Dual controller — PERC FD33xD (Integrated RAID

Controller <X> in Front Chassis Slot <Y>, where X

displays the controller number and Y displays the front

chassis slot number.

Slot ID Displays the slot to which the controller is attached. For

PowerEdge FD332 storage sled, the name is displayed as: PCI

Slot <Y> <X>, where Y displays the front chassis slot number

and X displays the controller number.