Users Guide

PCIe SSDs and run PCIe SSD tasks on the PCIe SSD in slot card Properties page. To view the complete PCIe SSD in slot card
properties, click Full View on the top of the page. For more information, see PCIe SSD in Slot Card Tasks
The following table lists the PCIe SSD in slot card properties.
Table 6. PCIe SSD in Slot Card Properties
Properties Description
ID
Displays the ID assigned to the PCIe SSD in slot card by Storage
Management.
Status These icons represent the severity or health of the PCIe SSD in
slot card.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
— Unknown
Name Displays the name of the PCIe SSD in slot card as PCIe SSD in
Slot <X>, where <X> represents the front chassis slot number.
State Displays the status of the PCIe SSD in slot card. Possible values
are:
Ready — The PCIe SSD in slot card is functioning normally.
Degraded — The PCIe SSD in slot card has encountered a
failure and is operating in a degraded state.
Failed — The PCIe SSD in slot card has encountered a failure
and is no longer functioning.
Device Name Displays the name of the PCIe SSD in slot card. The name
comprises the bay ID and the slot in which the PCIe SSD in slot
card is installed.
Bus Protocol Displays the technology that the PCIe SSD is using.
Device Protocol Displays the device protocol of the PCIe SSD in slot card, such
as Non-Volatile Memory Express (NVMe).
Media Displays the media type of the device.
Driver Version Displays the version of the driver that is installed on the PCIe
SSD subsystem.
NOTE: Storage Management displays Not Applicable for
subsystem for which the driver version cannot be
obtained.
Remaining Rated Write Endurance
Displays information on the SSD renewal/replacement based on
the amount of write workloads. This eld indicates the total
remaining programs or erase-cycles available on the SSD, based
on the cumulative specication of the total NAND (Negated
AND or NOT AND) Flash chips in the SSD.
40