Users Guide
Related links
Path Health
Path Health
The path health of the connectors is represented as normal, warning, or critical. The possible values are displayed as Available,
Degraded, or Failed.
If the enclosure health is displayed as degraded and further investigation shows all enclosure components (EMMs, Fans, Physical
Disks, Power Supplies, and Temperature) to be in normal condition, select the Information/Conguration subtab of the enclosure to
view details of the Path Failure.
Related links
Setting The Redundant Path Conguration
Logical Connector Properties And Tasks
Clearing The Connectors Redundant Path View
If you do not want the redundant path view, physically disconnect the connector port from the enclosure and reboot the system.
After the system reboots, the user interface still displays the logical connector, but in a critical state. To clear the redundant path
mode, select Clear Redundant Path view from the Controller Tasks.
Selecting this option clears the redundant path view and the connectors are represented on the user interface as Connector 0 and
Connector 1.
Related links
Setting The Redundant Path Conguration
Connector Components
For information on attached components, see Enclosure And Backplane Properties And Tasks.
103