Connectivity Guide

MIB Name Agent / Hardware Supported Purpose of the MIB
dcs3rmt.mib Dell Remote Access controller 5 (DRAC
5)
Provides information about remote access components
monitored by the Server Administrator Remote Access
Service.
rac_host.mib Remote access out-of-band agent Provides information about the components monitored
by the remote access out-of-band software agent.
DELL-RAC-MIB.txt Chassis Management Controller (CMC) Provides information about components monitored by
the Chassis Management Controller for modular chassis.
This MIB is the legacy iDRAC MIB. Changes made in this
MIB are not for iDRAC. iDRAC does not support all the
objects and traps dened in this MIB. The new and more
extensive iDRAC MIB is available for iDRAC7 and later
versions.
DcAsfSrv.mib Baseboard Management Controller
(BMC)
Provides information about Dell server Platform Event
Traps generated by the Baseboard Management
Controller.
For further details see Release Notes for Management Information Base readme_mibs.txt.
Server Administrator Instrumentation MIB
The Server Administrator Instrumentation MIB ( lename 10892.mib ) provides instrumentation data that allows you to monitor the
health of a system with SNMP management applications. It provides:
• Information about the status of temperatures, power supplies, voltages, currents, fans, and memory at key points in the system
• Rapid access to detailed fault and performance information gathered by industry standard systems management agents
• Version information for Basic Input/Output System (BIOS), rmware, and operating system
• A detailed account of every cost of ownership (COO) detail about your system
In addition, traps are sent to report a change in status of the health of critical components.
The Server Administrator Instrumentation MIB structures its MIB objects into groups of scalar objects or MIB tables that provide
related information. The below table describes each Server Administrator Instrumentation MIB group and lists the MIB group number
assigned to the MIB group. The Server Administrator Instrumentation MIB groups are identied by the SNMP OID
1.3.6.1.4.1.674.10892.1.<MIB group number>, where <MIB group number> is the MIB group number assigned to the MIB group. See
the relevant section for more information about the MIB objects dened in a MIB group.
Table 3. Server Administrator Instrumentation MIB Sections in This Guide
Section Topics MIB Group Numbers
2 Instrumentation MIB Version Group — denes version numbers of the
Instrumentation MIB
1
3 Systems Management Software Group — denes information about the
systems management software and the supported systems management
standards
100
4 System State Group — denes status, state, and redundancy for a
system and its components
200
5 Chassis Information Group — denes chassis types, events, and
indicators
300
6 Operating System Group — denes variables for name, version, service
pack, and other information about a system’s operating system
400
7 System Resource Group — denes variables for input/output ports,
memory, interrupts, and direct memory access
500
8