Connectivity Guide

resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
NOTE: Chassis identication capabilities allow system administrators to set front panel light-emitting diodes (LEDs) to
blink when the chassis has malfunctioning components. When enabled, the blinking lights help administrators locate the
problem chassis.
Table 234. Chassis Identication Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The chassis identication control’s state is unknown..
enabled(2)
The chassis identication control’s state is disabled
(oine, a binary 0 value) or enabled (online, a binary 1
value).
notReady(4)
The chassis identication control’s state is not ready.
identifyChassis(8)
The chassis identication control’s LEDs may be returned
to (normal) 0, or (identify chassis) 1.
identifyChassisAndE
nable (10)
The chassis identication control’s LEDs may be returned
to normal (a binary 0 value), or identify chassis and
enabled (a binary 1 value).
Table 235. Host Control Capabilities
Variable Name : DellHostControlCapabilities
NOTE: An operator can manually enable these actions using SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualRebootCapabl
e(1)
The operator can reboot capable host.
manualPowerOFFCapab
le(2)
The operator can power o capable host.
manualPowerCycleCap
able(4)
The operator can power-cycle capable host.
manualAllExceptOper
ating
SystemShutdownCapab
le(7)
The operator can reboot and power o capable host.
manualOperatingSyst
emShut
downCapable(8)
The operator can shut down the operating-system–
shutdown capable host.
manualFullyCapable(
15)
The operator can reboot, power on and o the power-
cycle capable host, and shut down the operating-
system–shutdown capable host.
manualRebootWithOSS
hutdow nCapable(16)
The operator can reboot with operating system
shutdown.
manualRebootWithout
OSShut
downCapable(32)
The operator can reboot without operating system
shutdown.
65