Reference Guide

CIM_RedundancyGroup

The

CIM_RedundancyGroup class described in Table properties below is a set of components that provide more instances of a

critical component than are required for the system’s operation. The extra components are used in case of critical component

failure. For example, multiple power supplies allow a working power supply to take over when another power supply has failed.

Table 52. CIM_RedundancyGroup Properties

Class Name:

CIM_RedundancyGroup

Parent Class:

CIM_LogicalElement

Property Description Data Type

CreationClassName See Common Properties of Classes string

Name Serves as the key for the redundancy

group’s instance in an enterprise

environment.

string

RedundancyStatus Provides information on the state of the

redundancy group. Values for the

RedundancyStatus property are as

follows:

0- Unknown

1- Other

2- Fully redundant. Fully redundant - all of

the configured redundancy is still

available.

3 - Degraded redundancy. Degraded

redundancy - that some failures have

been experienced but some reduced

amount of redundancy is still available.

4 - Redundancy lost. Redundancy lost -

that a sufficient number of failures have

occurred so that no redundancy is

available and the next failure experienced

causes overall failure.

uint16

CIM_ExtraCapacityGroup