Reference Guide

DataWidth Indicates the data width, in
bits, of the physical memory. A
data width of 0 and a total
width of 8 would indicate that
the memory is solely used to
provide error correction bits.
uint16
Speed Indicates the speed of the
physical memory, in
nanoseconds.
uint32
Rank
The Rank values of DIMM are:
0 - Unknown
1 - Single
2 - Dual
4 - Quad
8 - Octal
16 - Hexa
unit32
SpeedAsString Indicates the accurate speed
of the physical memory, in
string format (with units).
string
Capacity Indicates the total capacity of
this physical memory, in bytes.
uint64
BankLabel A string identifying the
physically labeled bank where
the memory is located, for
example, "Bank 0" or "Bank A."
string
PositionInRow Specifies the position of the
physical memory in a “row.”
For example, if it takes two 8-
bit memory devices to form a
16-bit row, then a value of 2
means that this memory is the
second device. 0 is an invalid
value for this property.
uint32
InterleavePosition Indicates the position of this
physical memory in an
interleave. 0 indicates
noninterleaved. 1 indicates the
first position, 2 the second
position, and so on. For
example, in a 2:1 interleave, a
value of 1 indicates that the
memory is in the “even”
position.
uint32
Manufacturer Indicates the manufacturer of
the physical memory.
string
SerialNumber Indicates the serial number of
the physical memory.
string
19