Install Guide

Configuring Active Directory Using CLI On Systems Running Server Administrator

You can use the omconfig preferences dirservice command to configure the Active Directory service. The

productoem.ini file is modified to reflect these changes. If the adproductname is not present in the productoem.ini file, a default

name is assigned.

The default value is system name-software-product name, where system name is the name of the system

running Server Administrator, and softwareproduct name refers to the name of the software product defined in omprv32.ini (that is,

computerName-omsa).

NOTE: This command is applicable only on Windows.

NOTE: Restart the Server Administrator service after you have configured Active Directory.

The following table shows the valid parameters for the command.

Table 17. Active Directory Service Configuration Parameters

name=value pair Description

prodname=<text> Specifies the software product to which you want to apply the

Active Directory configuration changes. Prodname refers to the

name of the product defined in omprv32.ini. For Server

Administrator, it is omsa.

enable=<true | false>

true: Enables Active Directory service authentication support.

false: Disables Active Directory service authentication support.

adprodname=<text> Specifies the name of the product as defined in the Active

Directory service. This name links the product with the Active

Directory privilege data for user authentication.