Connectivity Guide

alertOnWarningAndEr
ror(4)
The LED control is set to alert on an error or a warning
condition.
Table 231. Hard-Drive Fault LED Control Capabilities
Variable Name : DellHDFaultLEDControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The hard drive has no fault LED capabilities.
unknownCapabilitie
s(1)
The hard-drive fault LED capabilities are unknown.
enableCapable(2)
The hard-drive fault LED can be disabled (offline, a binary
0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The hard-drive fault LED can indicate not ready.
resetCapable(8)
The hard-drive fault LED can be reset.
Table 232. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
enabled(2)
The hard-drive fault LEDs’ state is disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The hard-drive fault LEDs’ state is not ready.
reset(8)
The hard-drive fault LEDs have been reset.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
Table 233. Chassis Identification Control Capabilities
Variable Name : DellChassisIdentifyControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis identification
capabilities.
unknownCapabilitie
s(1)
The chassis identification control’s capabilities are
unknown.
enableCapable(2)
The chassis identification controls can be disabled
(offline, a binary 0 value) or enabled (online, a binary 1
value).
notReadyCapable(4)
The chassis identification control’s capabilities are not
ready.
identifyCapable(8)
The chassis identification control’s LEDs can be made to
identify the chassis.
64