Connectivity Guide

NOTE: These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
none(0)
SD card device has none of the following capabilities.
sdCapable(1)
SD media can be enabled.
vFlashCapable(2)
Virtual Flash (vFlash) can be enabled.
Table 916. SD Card Device Config Settings
Variable Name:DellSDCardDeviceConfigSettings
Data Type:Integer
NOTE: These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
none(0)
SD card device has none of the following settings.
sdEnabled(1)
SD media is enabled.
vFlashEnabled(2)
Virtual Flash (vFlash) is enabled.
Table 917. SD Card Device Card State
Variable Name:DellSDCardDeviceCardState
Data Type:Integer
Possible Data Values Meaning of Data Value
none(0)
SD card state is none of the following states.
present(1)
Device is present.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
offline(8)
Device is offline.
failed(16)
Device is failed.
active(32)
Device is active.
bootable(64)
Device is bootable.
writeProtect(128)
Device is write-protected.
standby(256)
Device is in standby mode.
Table 918. SD Card Device Card Licensed
Variable Name:DellSDCardDeviceCardLicensed
Data Type:Integer
Possible Data Values Meaning of Data Value
unlicensed(0)
SD card is not licensed by system vendor.
licensed(1)
SD card is licensed by system vendor.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
offline(8)
Device is offline.
217