Connectivity Guide

eccSingleBitCorrect
ionFailureRate(2)
Memory device has exceeded the Correctable Memory
Event failure rate.
eccMultiBitFault(4)
Memory device has encountered an Uncorrectable
Memory Event.
eccSingleBitCorrect
ionLoggingDisabled
(8)
Correctable Memory Event logging for memory device
has been disabled.
deviceDisabledBySpa
reActivation(16)
Memory device is disabled because of spare memory
activation.
Table 906. Network Device Connection Status
Variable Name:DellNetworkDeviceConnectionStatus
Data Type:Integer
Possible Data Values Meaning of Data Value
unknown(0)
Unable to determine connection status.
connected(1)
Media reports that device is connected.
disconnected(2)
Media reports that device is disconnected.
driverBad(3)
Driver cannot be opened to determine status.
driverDisabled(4)
Driver is disabled.
hardwareInitalizin
g(10)
Hardware is initializing.
hardwareResetting(1
1)
Hardware is resetting.
hardwareClosing(12)
Hardware is closing down.
hardwareNotReady(13
)
Hardware is not ready.
Table 907. Network Device Teaming Flags
Variable Name:DellNetworkDeviceTeamingFlags
Data Type:Integer
NOTE: These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
undefined(0)
Teaming flags are undefined.
noTeam(1)
Device is not part of any team.
teamingEnabled(2)
Teaming is enabled.
adapterFaultToleran
ceMode(4)
Adapter fault tolerance teaming mode.
loadBalancingMode(8
)
Load balancing teaming mode.
Table 908. Network Device TOE Capability Flags
Variable Name:DellNetworkDeviceTOECapabilityFlags
Data Type:Integer
214