Install Guide

Table Of Contents
Table 4. Deployment Scenarios
You want to Select
You must then install the Server Administrator Web Server on
the remote system.
View the status of local and remote storage attached to a
managed system and obtain storage management information
in an integrated graphical view.
Storage Management.
Remotely access an inoperable system, receive alert
notifications when a system is down, and remotely restart a
system.
DRAC Command Line Tools.
NOTE: Install the Simple Network Management Protocol (SNMP) agent on the managed system using the operating
system medium before installing the managed system software.
Installer Location
The location of the installers for 32bit and 64bit are:
32bit: DVD Drive\SYSMGMT\srvadmin\windows\SystemsManagement\SysMgmt.msi
64bit: DVD Drive\SYSMGMT\srvadmin\windows\SystemsManagementx64\SysMgmtx64.msi
NOTE: You cannot install both 32bit and 64bit installers on the same system.
Installing Server Administrator
This section explains how to install the Server Administrator and other managed system software using two installation options:
Using the setup program at \SYSMGMT\srvadmin\windows on the Systems Management Tools and Documentation
DVD.
Using the unattended installation method through the Windows Installer Engine msiexec.exe.
NOTE:
SNMP service is stopped and started during Systems Management installation and uninstallation. As a result, other
third-party services, dependent on SNMP stop. If the third-party services are stopped, manually restart the services.
NOTE: For Blade systems,install Server Administrator on each server module installed in the chassis.
NOTE: During installation of Server Administrator on supported Windows systems, if an Out of Memory error message
is displayed, exit the installation and free up memory. Close other applications or perform any other task that frees up
memory, before reattempting Server Administrator installation.
NOTE: If you use the MSI file to try to install Server Administrator on a system where the User Account Control settings
is set to a greater level, the installation fails and displays a message: Server Administrator installation
program could not install the HAPI driver. You must perform the installation process as an administrator.
You can also install Server Administrator successfully by the following methods:
Click the setup.exe file, or
Right-click Command Prompt > Run as administrator, and then run the installer command in CLI mode. For more
information on CLI mode, see Installing Managed System Software In CLI Mode
The setup program invokes the prerequisite checker, which uses the system's Peripheral Component Interconnect (PCI) bus to
search for installed hardware such as controller cards.
The Systems Management installer features a Typical Setup option and a Custom Setup option for installing Server
Administrator and other managed system software.
Related Links:
Deployment Scenarios for Server Administrator
Optional Command Line Settings
18
Installing Managed System Software On Microsoft Windows Operating Systems