Users Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=Proc2NumCores setting=<integer>
attribute=Proc64bit setting=<string>
attribute=ProcAdjCacheLine setting=Enabled | Disabled
attribute=ProcBusSpeed setting=<string>
attribute=ProcCores setting=Single | All | Dual | Quad | 1 | 2 | 4
| 6 | 8 | 10 | 12 | 14 | 16
attribute=ProcCoreSpeed setting=<string>
attribute=ProcExecuteDisable setting=Enabled | Disabled
attribute=ProcHwPrefetcher setting=Enabled | Disabled
attribute=ProcVirtualization setting=Enabled | Disabled
attribute=QpiBandwidthPriority setting=InputOutput | Compute
attribute=QpiSpeed setting=MaxDataRate | 8GTps | 7GTps |
6GTps
attribute=RtidSetting setting=Enabled | Disabled
attribute=Proc1ControlledTurbo –
Proc4ControlledTurbo
NOTE: The option is supported
only on 13G and later systems.
setting=Disabled | ControlledTurboLimit |
ControlledTurboLimitMinus1 |
ControlledTurboLimitMinus2 |
ControlledTurboLimitMinus3
attribute=ProcConfigTdp
NOTE: The option is supported
only on 13G and later systems.
setting=Nominal | Level1 | Level2
attribute=ProcATS setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to
Disabled.
attribute=ProcX2Apic
NOTE: The option is supported
only on 13G and later systems.
setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to
Disabled.
SATA Settings attribute=EmbSata setting=Off | AtaMode | RaidMode |
AhciMode
attribute=eSataPort1 setting=Off | Auto
attribute=eSataPort1Capacity setting=<string>
attribute=eSataPort1DriveType setting=<string>
attribute=eSataPort1Model setting=<string>
attribute=SataPortA - SataPortJ setting=Off | Auto
attribute=SataPortACapacity -
SataPortJCapacity
setting=<string>
69