Users Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=diskette setting=off | auto | writeprotect
off: Disables the diskette drive.
auto: Auto-enables the diskette drive.
writeprotect: The diskette drive is
available in read-only format only.
Makes the diskette drive read-only.
attribute=dualnic setting=off | on | pxeboth | nic1pxe |
nic2pxe | isciboth | nic1isci | nic2isci |
nic1pxenic2isci | nic1iscinic2pxe |
onpxeboth | onpxenone | onpxenic1 |
onpxenic2
off: Disables the Network Interface
Controllers (NICs).
on: Enables the network interface
(PXE or iSCSI is not enabled on either
of the NICs).
pxeboth: Enables PXE on both NICs.
nic1pxe: Enables PXE on the first NIC
and none (no PXE or iSCSI) on the
second NIC.
nic2pxe: Enables none (no PXE or
iSCSI) on first NIC and PXE on the
second NIC.
isciboth: Enables iSCSI on both the
NICs.
nic1isci: Enables iSCSI on the first NIC
and none (no PXE or iSCSI) on the
second NIC.
nic2isci: Enables none (no PXE or
iSCSI) on the first NIC and iSCSI on
the second NIC.
nic1pxenic2isci: Enables PXE on the
first NIC and iSCSI on second NIC.
nic1iscinic2pxe: Enables iSCSI on the
first NIC and PXE on second NIC.
The following options are deprecated:
onpxeboth: Enables PXE on both the
NICs.
onpxenone: PXE is not enabled on
either of the NICs.
onpxenic1: Enables PXE on NIC 1.
onpxenic2: Enables PXE on NIC 2.
attribute=embhypvisor
setting=enabled | disabled
enabled: Enables the embedded
hypervisor.
disabled: Disables the embedded
hypervisor.
attribute=embvideoctrl setting=enabled | disabled
enabled: Enables the embedded video
controller as the primary video device.
disabled: Disables the embedded video
controller as the primary video device.
attribute=esataport setting=off | auto
off: Sets the embedded SATA port
value to off.
auto: Sets the embedded SATA port
value to auto.
attribute=extserial setting=com1 | com2 | rad
com1: Maps the external serial
connector to COM 1.
com2: Maps the external serial
connector to COM 2.
60