Users Guide

Server Administrator includes a number of services, each having a version number of its own. The Contains field reports version

numbers for the services and provides other useful details. The output may change depending on the configuration of the system

and the version of Server Administrator.

Table 42. Output

Contains: Broadcom SNMP Agent 10.xx.xx

Common Storage Module 3.x.x

Data Engine 5.x.x

Hardware Application Programming Interface 5.x.x

Instrumentation Service 6.x.x

Instrumentation Service Integration Layer 1.x.x

Intel SNMP Agent 1.xx.x

OpenManage Inventory Collector 6.x.x

OpenManage Tools 6.x.x

Remote Access Controller 4 Data Populator 4.x.x

Remote Access Controller 4 Managed Node 4.6.3

Secure Port Server 1.x.x

Server Administrator Framework 6.x.x

Agent for Remote Access 1.x.x

Storage Management 3.x.x

Sun Java Runtime Environment 1.x.xx

Omconfig Chassis Or Omconfig Mainsystem

Use the omconfig chassis or omconfig mainsystem commands to:

• Set to default or assign specific values for fan, voltage, and temperature probes

• Configure BIOS behavior during system start up

• Clear memory error counts

• Enable or disable power button control features if the system configuration permits

Use the omconfig chassis -? or omconfig mainsystem -? command to view a list of all omconfig chassis or omconfig mainsystem

commands.

Omconfig Chassis Biossetup Or Omconfig Mainsystem Biossetup

Use the omconfig chassis biossetup or omconfig mainsystem biossetup command to configure system BIOS settings that are

normally available only in the BIOS setup boot time settings of the system.

CAUTION: Changing certain BIOS setup options may disable the system or require you to reinstall the operating system.

NOTE: Reboot the system for the BIOS setup options to take effect.

NOTE: Not all BIOS setup options are available on every system.

NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, you cannot configure the BIOS settings using

omconfig command.