Users Guide

Output Attributes Description
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
sixth destination.
Destination Number:
Destination 7
destination 7: Displays the seventh destination.
Example:
210.211.212.213: IP address of the seventh destination.
Destination Number:
Destination 8
destination 8: Displays the eighth destination.
Example:
210.211.212.213: IP address of the eighth destination.
Destination Configuration
Settings
attribute=communitystring
communitystring: Displays the text string that acts as a password
and is used to authenticate SNMP messages sent between the
BMC and the destination management station
.
NOTE: On 12G systems with iDRAC7 specific versions, ipaddress can also be a Fully Qualified Domain Name (FQDN).
Omreport System Platformevents Or Omreport Servermodule Platformevents
Use the omreport system platformevents or omreport servermodule platformevents command to view how the system responds
for each listed platform event.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the
user scripts as applicable.
Omreport System Recovery Or Omreport Servermodule Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is an action configured for a
hung operating system. You can also view the number of seconds that must elapse before an operating system is considered hung.
Omreport System Shutdown Or Omreport Servermodule Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending shutdown actions for the
system. If properties for shutdown are configured, executing this command displays these properties.
Omreport System Summary Or Omreport Servermodule Summary
Use the omreport system summary or omreport servermodule summarycommand to view a comprehensive summary of software
and hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server Administrator
displays the USC version.
45