Users Guide

Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Use the omreport system pedestinations or omreport servermodule pedestinations command to view destinations where alerts are
sent for platform events. Depending on the number of destinations displayed, configure a separate IP address for each destination
address. Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command lists each of the valid
parameters.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the
user scripts as applicable.
Destination configuration settings for the Omreport system pedestinations or Omreport servermodule
pedestinations
The actual number of destinations that you can configure on a system using omreport system pedestinations or omreport
servermodule pedestinations may differ.
The following table displays the available settings.
Table 33. Settings For The Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the first destination.
Example:
101.102.103.104: IPv4 address of the first destination.
Destination Number:
Destination 2
destination 2: Displays the second destination.
Example:
110.120.130.140: IPv4 address of the second destination.
Destination Number:
Destination 3
destination 3: Displays the third destination.
Example:
201:202:203:204: IPv4 address of the third destination.
Destination Number:
Destination 4
destination 4: Displays the fourth destination.
Example:
210.211.212.213: IPv4 address of the fourth destination.
Destination Number:
Destination 5
destination 5: Displays the fifth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
fifth destination.
Destination Number:
Destination 6
destination 6: Displays the sixth destination.
Example:
44