Users Guide

If you specify the index, Server Administrator displays the Team interface details for the specific NIC and the values for the
following fields: Team Interface, Interface, IPv4 Addresses, IPv6 Addresses , Team Interface Receive Statistics , Team Interface
Transmit Statistics , Interface Receive Statistics, and Interface Transmit Statistics.
Omreport Chassis Ports Or omreport Mainsystem Ports
Use the omreport chassis ports or omreport mainsystem ports command to view properties of the system’s parallel and serial ports.
NOTE: CMC USB ports attached with blade servers are not enumerated by OMSA.
Server Administrator displays values for the following fields: Port Type, External Name, Base I/O Address, IRQ Level, Connector
Type, and Maximum Speed. The following table provides the description of the fields:
Table 20. Fields and Description
Field Description
Port Type Detailed type of each system port, from the more general serial, parallel, and USB ports to the names of ports by
device type connected to it, for example, pointing device or keyboard.
External Name Name of the port, such as serial or parallel, USB, mouse, keyboard, and so on.
Base I/O
Address
Starting I/O address expressed in hexadecimal.
IRQ Level Hardware interrupt on a system. The hardware interrupt signals the system's CPU that an event has started or
ended in a peripheral component such as a modem or printer. When communicated over a peripheral component
interconnect card, the IRQ level is a standard way to identify the type of device that is sending the interrupt
request.
Connector
Type
Type of plug or cable and plug that connects two devices together, in this case, the type of connector that
attaches an external device to a system. There are many connector types, each designed to connect a different
device type to a system. Examples include DB-9 Male, AT, Access Bus, PS/2, and so on.
Maximum
Speed
Port speed. Port speed refers to the data transmission rate of an input/output channel, measured in numbers of
bits per second. Serial ports usually have a maximum speed of 115 Kbps and USB version 1.x ports have a
maximum speed of 12 Kbps.
Omreport Chassis Processors Or Omreport Mainsystem Processors
Use the omreport chassis processors or omreport mainsystem processors command to view properties of the system’s processors.
Server Administrator displays values for the following fields: Index, Status, Connector Name, Processor Brand, Processor Version,
Current Speed, State, and Core Count.
The following table provides the description of the fields.
Table 21. Fields and Description
Field Description
Index Processor number
Status Current status of the processor.
Connector Name Name or number of the device that occupies the processor slot in the system.
Processor Brand Type of processor made by a manufacturer such as Intel Itanium, Intel Pentium III, Intel Xeon, or AMD
Opteron.
Processor Version Model and stepping number of the processor.
Current Speed Actual processor speed in MHz at system boot time.
State Whether the processor slot is enabled or disabled.
Core Count Number of processors integrated into one chip.
31