Users Guide

Table (tbl)
Use the tbl or table formatting option to have the data formatted in table rows and columns. To see the following example
command output in table format, type:
omreport system summary -fmt tbl
or
omreport servermodule summary -fmt tbl
The example output displays as follows:
------------------------------
Network Interface 0
------------------------------
| ATTRIBUTE | VALUE
| IP Address | 143.166.152.108
| Subnet Mask | 255.255.255.0
| Default Gateway | 143.166.152.1
| MAC Address | 00-02-b3-23-d2-ca
Semicolon-Separated Values (ssv)
Use the ssv formatting option to deliver output formatted in semicolon-separated value format. This format also allows you to
import the command output results into a spreadsheet program such as Microsoft Excel, or into a database program. To see the
following example command output in semicolon-separated value format, type:
omreport system summary -fmt ssv
or
omreport servermodule summary -fmt ssv
The example output displays as follows:
------------------------------
Network Data
------------------------------
Network Interface 0
IP Address;143.166.152.108
Subnet Mask;255.255.255.0
Default Gateway;143.166.152.1
MAC Address;00-02-b3-23-d2-ca
Custom delimited format (cdv)
Use the cdv formatting option to report exported data in custom delimited format. You can specify this option with any omreport
command. For example, to generate a system summary in custom delimited format, type:
omreport system summary -fmt cdv
or
omreport servermodule summary -fmt cdv
You can also set preferences for the custom delimited format with the omconfig command. The valid values for delimiters are:
exclamation, semicolon, at, hash, dollar, percent, caret, asterisk, tilde, question, colon, comma, and pipe.
The following example shows how to set the delimiter for separating data fields to asterisk:
omconfig preferences cdvformat delimiter=asterisk
187