Users Guide

Command Level 1 CommandLevel 2 Command Level 3 User Privilege Required Use
settings, such as the
Power button and/or
Nonmasking Interrupt
(NMI) button (if present
on the system), are
enabled or disabled. It
also displays the front
panel encryption access
information and the
front panel LCD
information.
fru U, P, A Displays the Field
Replaceable Unit (FRU)
information.
hwperformance U, P, A Displays the status and
cause for the system’s
performance
degradation.
info U, P, A Displays a status
summary for main
system chassis
components.
intrusion U, P, A Displays the status of
the system’s intrusion
sensor(s).
leds U, P, A Displays the properties
you have set for light-
emitting diodes to flash
under various alert
conditions.
memory U, P, A Displays properties of
the system's memory
arrays.
nics U, P, A Displays the NIC and
Team interface
properties.
ports U, P, A Displays the properties
for the system’s parallel
and serial ports, such as
I/O address, IRQ level,
connector type, and
maximum speed.
processors U, P, A Displays properties of
the system’s processors,
including speed,
manufacturer, and
processor family.
18