Users Guide

Omconfig Change Encryption Key
Table 172. Omconfig Change Encryption Key
Description Changes the encryption key for the controller, if passphrase is provided.
Syntax
omconfig storage controller action= changesecuritykey controller=id keyid=<keyid
string> passphrase=passphrase string> oldpassphrase=<old passphrase
string>[escrow=yes] [filepath=<Absolute path to the escrow file>]>
Example to Change the encryption key for the controller.
Example
omconfig storage controller action= changesecuritykey controller=1
keyid=Dell_123 passphrase=Dell_123 oldpassphrase=Dell_321 escrow= yes
filepath=C:/escrow.xml
NOTE: If you set escrow=yes, specify the escrow file path.
Omconfig Delete Encryption Key
Table 173. Omconfig Delete Encryption Key
Description Deletes the encryption key for the controller.
Syntax omconfig storage controller action= deletesecuritykey controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Change the encryption key for the controller.
Example
omconfig storage controller action= deletesecuritykey controller=1
Omconfig Set Background Initialization Rate
Table 174. Omconfig Set Background Initialization Rate
Description Sets the background initialization rate.
Syntax omconfig storage controller action=setbgirate controller=id rate=<0 to 100>,
where id is the controller ID as reported by the omreport storage controller command.
Example to Sets the background initialization rate to 50 on controller 1.
Example
omconfig storage controller action=setbgirate controller=1 rate=50
Omconfig Set Reconstruct Rate
Table 175. Omconfig Set Reconstruct Rate
Description Sets the reconstruct rate.
Syntax
omconfig storage controller action= setreconstructrate controller=id rate=<0 to
100>, where id is the controller ID as reported by the omreport storage controller command.
Example to Set the reconstruct rate to 50 on controller 1.
166