Users Guide

Example
omconfig storage controller action=rescan controller=1
NOTE: The rescan controller is not supported on non-RAID SCSI and SAS controllers.
Reboot the system to make the configuration changes visible on non-RAID SCSI
controllers.
Omconfig Enable Controller Alarm
Table 150. Omconfig Enable Controller Alarm
Description Enables the controller alarm. For more information, see the Dell OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Enable the alarm on controller 1.
Example
omconfig storage controller action=enablealarm controller=1
Omconfig Disable Controller Alarm
Table 151. Omconfig Disable Controller Alarm
Description Disables the controller alarm. For more information, see the Dell OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Disable the alarm on controller 1.
Example
omconfig storage controller action=disablealarm controller=1
Omconfig Quiet Controller Alarm
Table 152. omconfig Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell OpenManage Online Help.
Syntax omconfig storage controller action=quietalarm controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
omconfig Test Controller Alarm
Table 153. omconfig Test Controller Alarm
Description Tests the functionality of the controller alarm. The alarm sounds for about two seconds. For more
information, see Dell OpenManage Online Help.
Syntax omconfig storage controller action=testalarm controller=id , where id is the
controller ID as reported by the omreport storage controller command.
157