Users Guide

Omconfig Initialize Physical Disk
Table 113. omconfig Initialize Physical Disk
Description
Initializes a physical disk.
Syntax
omconfig storage pdisk action=initialize
controller=id pdisk=id, where id is the controller ID and
physical disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs
for the physical disks attached to the controller.
Example to Initialize physical disk 4 on controller 1
Example
omconfig storage pdisk action=initialize
controller=1 pdisk=4
Omconfig Offline Physical Disk
Table 114. omconfig Offline Physical Disk
Description
Makes a physical disk offline.
Syntax
omconfig storage pdisk action=offline
controller=id pdisk=<PDISKID>, where id is the
controller ID. The <PDISKID> variable specifies the physical
disk.
NOTE: To obtain these values, type omreport storage
controller
to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs
for the physical disks attached to the controller.
Example to Offline physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:2:3
Omconfig Online Physical Disk
Table 115. omconfig Online Physical Disk
Description
Brings an offline physical disk back online.
Syntax
omconfig storage pdisk action=online
controller=id pdisk=<PDISKID>, where id is the
controller ID. The <PDISKID> variable specifies the physical
disk.
140