Users Guide

Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
Example for SAS controllers: controller=0
enclosure=1:2 info=temps
controller=id enclosure=<ENCLOSUREID>
info=temps index=n where id is the
controller number and <ENCLOSUREID>
is the enclosure number and n is the
number of a temperature probe. For
example: controller=0 enclosure=2
info=temps index=1
Displays the temperature probes for the
specified enclosure.
Omreport Fan Status
The following table describes the syntax for the omreport Fan commands:
Table 95. omreport Fan Status
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=fans where id is the controller
number and ENCLOSUREID is the
enclosure number. For example:
controller=0 enclosure=2
NOTE: For SCSI controllers, the ID
specified in
enclosure=<ENCLOSUREID> is the
connector number and for Serial
Attached SCSI (SAS) controllers,
ID is the
connectorNumber:EnclosureIndex.
Displays the fans for the specified
enclosure.
controller=id enclosure=<ENCLOSUREID>
info=fans index=n where id is the
controller number and ENCLOSUREID is
the enclosure number and n is the number
of a fan. For example: controller=0
enclosure=2 info=fans index=1
Displays the specified fan.
Omreport Power Supply Status
The following table describes the syntax for the omreport Power Supply commands:
Table 96. Omreport Power Supply Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id
enclosure=<ENCLOSUREID>
Displays the power supplies for the
specified enclosure.
131