Users Guide

Event Name Description
NOTE: This setting is independent of the individual platform event filter alert
settings. For a platform event filter to generate an alert, both the individual alert
and the global event alert are enabled.
event=batterywarn Sets action or enables or disables alert generation when a battery device detects that
the battery is pending a failure condition.
event=batteryfail Sets action or enables or disables alert generation when a battery device detects that
the battery has failed.
event=discretevolt Sets action or enables or disables alert generation when a discrete voltage probe detects
that the voltage is too low for proper operation.
event=fanfail Sets action or enables or disables alert generation when a fan probe detects that the fan
is running too slow or not at all.
event=hardwarelogfail Enables or disables alert generation when a hardware log detects a failure value.
event=intrusion Sets action or enables or disables alert generation when a chassis is opened.
event=powerwarn Sets action or enables or disables alert generation when a power device probe detects
that the power supply, voltage regulator module, or DC to DC converter is pending a
failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor probe detects that
the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power device probe detects
that the power supply, voltage regulator module, or DC to DC converter has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor probe detects that
the processor is running at less than peak performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor probe detects that
the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor probe detects that
the processor is absent.
event=redundegrad Sets action or enables or disables alert generation when the system fans and/or power
supplies become inoperative, resulting in less than full redundancy for that component.
event=redunlost Sets action or enables or disables alert generation when the system fans and/or power
supplies become inoperative, resulting in a lost or a no redundant components working
condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects a warning value.
event=systempowerfail Sets actions when a power consumption probe detects a failure value.
event=tempwarn Sets action or enables or disables alert generation when a temperature probe detects
that the temperature is approaching the maximum high or low limits.
event=removableflashmediapresent Sets actions that Server Administrator performs when the system detects a removable
flash media.
event=removableflashmediawarn Sets actions that Server Administrator performs when a removable flash media warning
is displayed.
event=removableflashmediafail Sets actions that Server Administrator performs when a removable flash media fails.
event=tempfail Sets action or enables or disables alert generation when a temperature probe detects
that the temperature is either too high or low for proper operation.
109