Users Guide

– Mozilla Firefox 45
• Support for the following adapter cards:
– Emulex LightPulse LPe31000-M6-D 1-Port 16Gb Fibre Channel Adapter
– Emulex LightPulse LPe31002-M6-D 2-Port 16Gb Fibre Channel Adapter
– Emulex LightPulse LPe32000-M2-D 1-Port 32Gb Fibre Channel Adapter
– Emulex LightPulse LPe32002-M2-D 2-Port 32Gb Fibre Channel Adapter
– Qlogic QLE2690-DEL FC16 1-port Fibre Channel Adapter
– Qlogic QLE2692-DEL FC16 2-port Fibre Channel Adapter
– Qlogic QLE2740-DEL FC32 1-port Fibre Channel Adapter
– Qlogic QLE2742-DEL FC32 2-port Fibre Channel Adapter
– Intel XL710 DP 40Gb QSFP+ Rack NDC
– Intel 40GbE 2P XL710 Adapter
– Intel(R) X550 Dual Port 10GBASE-T Networking Adapter
– Broadcom 25GbE 2P 57404S Adapter
– Broadcom 10GbE 2P 57402S Adapter
– Broadcom 10GbE Base-T 2P 57406 Adapter
– Mellanox 25GBE 2P ConnectX-4 LX Adapter
– Mellanox ConnectX-4 LX DP 25Gb SFP rNDC
– Intel 82599 DP 10G Mezzanine Adapter (Supported only on Dell PowerEdge C6320)
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix in
the required version of OpenManage Software at dell.com/openmanagemanuals.
NOTE: CLI commands are not supported on systems running the VMware ESXi operating system.
Accessing the windows command prompt to run CLI commands
If you are running the Microsoft Windows operating system, use the 32-bit command prompt to run a Server Administrator CLI
command. Access the 32-bit command prompt using one of the following methods:
• Click Start → Programs → Accessories → Command Prompt.
• Click Start → Run and type cmd.exe.
NOTE: Do not type command in the Run dialog box to launch a command line window; this activates the MS-DOS
emulator command.com, which has environment variable limitations that can cause subtle problems with CLI.
Primary CLI Commands
The commands that carry out the functions of Server Administrator are:
• omconfig
• omhelp
• omreport
The omconfig command writes values that you assign to an object's properties. You can specify values for warning thresholds on
components or prescribe actions that the system must perform when a certain warning or failure event occurs. You can also use the
omconfig command to assign specific values to the system's asset information parameters, such as the purchase price of the
system, the system's asset tag, or the system's location.
The omhelp command displays short-text help for CLI commands. The shorthand equivalent of omhelp is the command for which
you want help followed by -?. For example, to display help for the omreport command, type one of the following commands:
• omhelp omreport
10