Users Guide

• Resetting Configuration
• Exporting The Controller Log File
• Foreign Configuration Operations
• Importing Foreign Configurations
• Importing Or Recovering Foreign Configurations
• Clearing Foreign Configuration
• Setting Background Initialization Rate
• Setting Check Consistency Rate
• Setting The Reconstruct Rate
• Setting The Patrol Read Mode
• Starting And Stopping Patrol Read
• Managing The Preserved Cache
• Changing The Controller Properties
• Managing The Physical Disk Power
• Managing The Encryption Key
• Converting To RAID Capable Disks
• Converting To Non-RAID Disks
• Changing The Controller Mode
• Auto Configure RAID0 Operation
Creating A Virtual Disk
Does my controller support this feature? See Supported Features.
To launch the Create Virtual Disk Express Wizard, select the Create Virtual Disk task.
Related links
Create Virtual Disk Express Wizard
Enabling The Controller Alarm
Does my controller support this feature? See Supported Features.
To enable the alarm on the controller, select the Enable Alarm task. When enabled, the alarm sounds in
the event of a device failure.
Related links
Using Alarms To Detect Failures
Disabling The Controller Alarm
Does my controller support this feature? Supported Features.
Select the Disable Alarm task to disable the alarm on the controller. When disabled, the alarm does not
sound in the event of a device failure.
Turning Off The Controller Alarm
Does my controller support this feature? See Supported Features.
68