Users Guide

Controller Health

The controller Health page displays the status of the controller and the components attached to the

controller.

Related links

Storage Component Severity

Controller Information

Controller Components

For information on attached components, see:

• RAID Controller Batteries

• Firmware Or Driver Versions

• Connectors

NOTE: If you have connected the enclosure in Redundant path mode, the connectors are

represented as Logical Connector.

• Virtual Disks

Controllers Properties And Tasks

Use the controllers properties and tasks window to view information about the controller and perform

controller tasks.

NOTE: The firmware and drivers listed in the Server Administrator Release Notes, see the minimum

supported version for these controllers. Later versions of the firmware and drivers are also

supported. For the most recent driver and firmware requirements, contact your service provider.

Table 11. Controller Properties

Property Definition

ID Displays the ID assigned to the controller by Storage Management.

Storage Management numbers the controllers attached to the

system starting with zero. This number is the same as the controller

ID number reported by the omreport CLI Command. For

information on Command Line Interface, see the Server

Administrator Command Line Interface User’s Guide.

Status These icons represent the severity or health of the storage

component.

For more information, see Storage Component Severity.

• — Normal/OK

• — Warning/Non-critical

• — Critical/Failure/Error