Users Guide

Erroneous Status And Error Messages After A Windows Hibernation
Activating the Windows hibernation feature may cause Storage Management to display erroneous status
information and error messages. This problem resolves when the Windows operating system recovers
from hibernation.
Storage Management May Delay Before Updating Temperature Probe Status
In order to display the enclosure temperature and temperature probe status, Storage Management polls
the enclosure firmware at regular intervals to obtain temperature and status information. On some
enclosures, there is a short delay before the enclosure firmware reports the current temperature and
temperature probe status. This may cause a delay in displaying the correct temperature and temperature
probe status.
Related links
Changing The Warning Threshold On The Temperature Probe
Storage Management May Delay Displaying Storage Devices After Reboot
Storage Management requires time after a reboot to find and inventory all attached storage devices. You
may experience a delay in storage controllers being displayed until this operation has completed.
You Are Unable To Log Into A Remote System
Ensure that you have connected to the system with administrator privileges and have provided the
correct login details. The remote system may be turned off or there may be network problems.
Cannot Connect To Remote System Running Microsoft Windows Server
2003
When connecting to a remote system running Windows Server 2003, log in to the remote system using
an account that has administrator privileges. By default, Windows Server 2003 does not allow anonymous
(null) connections to access the SAM user accounts. Therefore, if you are attempting to connect using an
account that has a blank or null password, the connection may fail.
Reconfiguring A Virtual Disk Displays Error In Mozilla Browser
When reconfiguring a virtual disk using the Mozilla browser, the following error message may display:
Although this page is encrypted, the information you
have entered is to be sent over an unencrypted
connection and could easily be read by a third party.
You can disable this error message by changing the settings in the browser. To disable this error
message:
1. Select Edit → Preferences.
2. Click Privacy and Security.
3. Click SSL.
4. Clear the Sending form data from an unencrypted page to an unencrypted page option.
192