Users Guide

Power Supply Properties

Table 19. Power Supply Properties

Property Definition

Status These icons represent the severity or health of the storage

component.

— Normal/OK

— Warning/Non-critical

— Critical/Failure/Error

For more information, see Storage Component Severity.

Name Displays the name of the power supply.

State Displays the status of the power supply.

• Ready — The power supply is functioning normally.

• Degraded — The power supply has encountered a failure and

is operating in a degraded state.

• Failed — The power supply has encountered a failure and is no

longer functioning. Storage Management is unable to

communicate with the enclosure using SES commands. The

Failed state is displayed when the enclosure does not respond

to a status query from Storage Management for any reason. For

example, This state is displayed when you disconnect the

cable.

• Missing — The power supply is not present in the enclosure.

Part Number Displays the part number of the power supply.

This property is not displayed for the 22xS enclosures that have E.

17 firmware or later.

Firmware Version Displays the firmware version number of the power supply.

Enclosure Temperature Probes

The enclosure temperature probes are displayed under the Temperatures object. You can select the

Temperatures object to view the status information. The status information includes the current

temperature in Celsius and the warning and failure thresholds for the temperature probe.

The failure threshold has a default value that cannot be changed. However, you can set the warning

threshold.