Users Guide

Under the Properties tab, you can:
• View the current readings for your system's fan probes and configure minimum and maximum values
for fan probe warning threshold.
NOTE: Some fan probe fields differ according to the type of firmware your system has, such as BMC
or ESM. Some threshold values are not editable on BMC-based systems.
• Select fan control options.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event
that a fan returns a warning or failure value.
• Set the alert threshold levels for fans.
Firmware
Click the Firmware object to manage your system firmware. Firmware consists of programs or data that
have been written to ROM. Firmware can boot and operate a device. Each controller contains firmware
that helps provide the controller's functionality. The Firmware object action window can have the
following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view the system's firmware information.
Hardware Performance
Click the Hardware Performance object to view the status and cause for the system’s performance
degradation. The Hardware Performance object action window can have the following tab, depending
on the user's group privileges: Properties.
Poperties
Subtab: Information
Under the Properties tab, you can view the details of system’s performance degradation.
The following table lists the possible values for status and cause of a probe:
Table 9. Possible Values For Status And Cause Of A Probe
Status Values Cause Values
Degraded User Configuration
Insufficient Power Capacity
Unknown Reason
49