Users Guide

Access level. The managed system’s LCD information can be selected from the drop-down menu.

You can also enable Indication of Remote KVM session from the Front Panel sub tab.

Batteries

Click the Batteries object to view information about your system’s installed batteries. Batteries maintain

the time and date when your system is turned off. The battery saves the system’s BIOS setup

configuration, which allows the system to reboot efficiently. The Batteries object action window can have

the following tabs, depending on the user’s group privileges: Properties and Alert Management.

Properties

Subtab: Batteries

Under the Properties tab, you can view the current readings and status of your system’s batteries.

Alert Management

Subtabs: Alert Actions | SNMP Traps

Under the Alert Management tab, you can:

• View current alert actions settings.

• Configure the alerts that you want to take effect in case of a battery warning or critical/failure event.

BIOS

Click the BIOS object to manage key features of your system's BIOS. Your system’s BIOS contains

programs stored on a flash memory chipset that control communications between the microprocessor

and peripheral devices, such as the keyboard and the video adapter, and other miscellaneous functions,

such as system messages. The BIOS object action window can have the following tabs, depending on the

user's group privileges:

Properties and Setup

Properties

Subtab: Information

Under the Properties tab, you can view BIOS information.

Setup

Subtab: BIOS

NOTE: The BIOS Setup tab for your system only displays the BIOS features that are supported on

your system.

Under the Setup tab, you can set the state for each BIOS setup object.

You can modify the state of many BIOS setup features including but not limited to the Serial Port, Hard

Disk Drive Sequence, User Accessible USB Ports, CPU Virtualization Technology, CPU HyperThreading,

AC Power Recovery Mode, Embedded SATA Controller, System Profile, Console Redirection, and Console

Redirection Failsafe Baud Rate. You can also configure internal USB device, optical drive controller

settings, automatic system recovery (ASR) Watchdog Timer, embedded hypervisor, and additional LAN